The TE207P is a dual-span digital board with an on-board DSP-based echo cancellation module. It supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. (32-bit, 5.0 volt PCI only).
This borad is identical to the TE205 except that it comes with the VPM450M Octasic DSP-based echo cancellation module.
The
TE207P is for use only with a 5.0 volt PCI slot. The TE212P is for use only with a 3.3 volt PCI slot - typically available on newer motherboards and in 64-bit PCI bus architectures.
Cicso HDLC
HDLC
PPP
Multilink PPP
Frame Relay
PRI CPE & PRI NET
NI1
NI2
EuroISDN
4ESS (AT&T)
5ESS (Lucent)
DMS100
E&M
Wink
Feature Group B
Feature Group D
FXO & FXS
Ground Start
Loop Start
Loop Start with Disconnect Detect
Telecom
FCC Part 68 (TIA-968-A), IC CS-03, TBR 4, TBR 12, TBR 13, AS/ACIF S038, AS/ACIF S016
Safety
UL/CSA 60950, IEC 60950, EN60950, AS/NZS 60950
Note: Finland, Norway and Sweden require that equipment using this product must be located in a Restricted Access Location (RAL).
Emissions
EN55022 Class B Radiated & Conducted
Immunity
EN55024 ITE, EN61000
This product was added to our catalog on Friday 27 April, 2007.
